Article filter:

Press room

New decommissioning cutting tool passes tests with flying colours

Friday, 25 October 2019 08:00
Allspeeds’ fast intervention tool is lowered into Balmoral’s submersion test tank Allspeeds’ fast intervention tool is lowered into Balmoral’s submersion test tank

Balmoral Subsea Test Centre’s submersion tanks were called into action recently with a requirement to put an innovative new cutting and sealing tool for the decommissioning sector through its paces.

Accrington-based Allspeeds, the sole manufacturer of ‘Webtool’ hydraulic ROV cutters and systems, was awarded a contract to develop an environmentally friendly, fast intervention tool (FIT) for subsea pipeline decommissioning work.

The tool is designed to cut and seal pipework to prevent marine environment contamination removing the need for a containment dome during operations.

The concept of the FIT relies on a single system that is capable of multiple actions:

The pipeline is initially lifted from the seabed and secured to the tool. It is then crimped in two places either side of the cutting point to create a cavity without rupturing the pipe wall.

The pipe is then pierced between the two crimped sections to prevent any escape of contaminants and a sealant is injected into the cavity to create a ‘rubberised’ plug. Finally, the pipe is cut through the sealed section creating an additional crimp point and separating the pipe into two pieces.

The pipe ends are now fully sealed with the crimps preventing any release of pollutants.

The crimped pipeline before and after sealing and cutting
The crimped pipeline before and after sealing and cutting

When the FIT operations have concluded the tool is removed topside, reset and positioned further along the pipe to repeat at pre-designated lengths creating practical sections of pipe for surface recovery.

Rory McGarry, technical director with Allspeeds, said: “We were delighted with the way the tool performed under test conditions and with Balmoral’s facilities and engineering support.”

Test house manager at Balmoral, Derek Weir, said: “This was a complex procedure which involved a number of tests. I believe this demonstrates the flexibility and capabilities of our facility which are now being widely used by the oil and gas, renewables, oceanographic, defence and valve production sectors.”

With the FIT successfully completing rigorous testing at the Balmoral Subsea Test Centre in Aberdeen, Allspeeds is proceeding to full manufacture of production versions.

Notes to editor

Balmoral Offshore Engineering is part of Balmoral Group Holdings Ltd, a privately owned company based in Aberdeen, Scotland. Employing over 600 people Balmoral has been providing solutions to the energy, engineering, marine, building, polymer engineering and processing sectors since 1980.

Press contact

Steve Gibb
Public Relations Manager
Balmoral Park, Loirston, Aberdeen AB12 3GY
+44 (0)1224 859000
s.gibb@balmoral.co.uk

Balmoral Group

©2019 Balmoral Group Holdings Ltd

Search